Features and Benefits:

• Fits universally with, e.g. VW-Audi 1.2, 1.4 and 1.6 petrol engines and 1.9 SDI diesel engines.
• For counter holding the pulleys, toothed belt wheels, etc.
• For unscrewing and tightening the fastening screw
• The counter holding is done via pivots with a diameter of 11.5 mm or via the bolts M8
• Universal fit. Especially suitable for VW-Audi, Seat and ?koda 1.2, 1.4 and 1.6 engines and for ?koda 1.9 SDI diesel engines. Installed in VW Beetle, Bora, Caddy/Caddy Maxi, Eos, Fox, Golf, Golf Plus, Golf VI Cabrio, Jetta, Lupo, Passat, Polo, Scirocco, Sharan, Tiguan, Touran


This tool is designed to counter-hold pulleys, timing belt sprockets etc. It is required when loosening/tightening the fastening screw. The locking takes place either via the pins (� 11.5mm) which engage the holes of the pulleys/timing belt sprockets, or by fixing the reaction wrench to the crankshaft timing belt sprocket by means of the M8 bolt. Thanks to its special length of 704mm, this tool allows even very tight-fitting or stubborn fastening screws to be loosened with ease. It is required when loosening/tightening the fastening screw. The locking takes place either via the pins (� 11.5mm) which engage the holes of the pulleys/timing belt sprockets, or by fixing the reaction wrench to the crankshaft timing belt sprocket by means of the M8 bolt. Thanks to its special length of 704mm, this tool allows even very tight-fitting or stubborn fastening screws to be loosened with ease.