Features and Benefits:

• �� Operating range of 250 - 850 Nm
• 3/4" drive
• �� Adjustable, releasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures:�� Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate
• Working accuracy: +/- 3 % tolerance of scale set torque. The specification of the standard (+/- 4 %) is exceeded.�� For controlled bi-directional tightening�� 1/4", 3/8", 1/2" interchangeable mushroom head with ball locking device.�� Sturdy, varnished tubular steel construction, with zinc-plated ratchethead and top-grade plastic parts�� Ergonomically shaped, convenient black plastic handgrip with calibration aid�� Dual scale N�m and lbf�ft below a window with a magnifying-glass effect�� With micrometre scale for main N�m scale for setting interim values�� Release system triggers a tactile and audible signal�� Ergonomic system for torque adjustment


Calibration length: 1275,7 mm, Distance housing - square drive: 34,5 mm, Drive connector square (male): 3/4", Drive connector square (male): 20 mm, Drive type/drive: Push-through square, Graduation: 10, Graduation [lbf�ft]: 10 lbf�ft, Head height 1 [mm]: 38 mm, Net weight [kg]: 5,4 kg, Number of teeth: 36, Precision +/-: +/- 3 %, Range of application: AssemblyMaintenance and repair, Return angle: 10 °, Scale division [n-m]: 10 N�m, Target groups: AutomotiveIndustryConstruction and commercial vehiclesConsumerEnergyMechanical engineeringWorkshopServiceAgricultureOil & GasUtilities, Test certificate: DIN EN ISO 6789-2:2017, Tightening direction: Left and right, Trigger mechanism: Short path triggering, vernier Nm: 1 N�m, Width of head 1 [mm]: 69,0 mm; Use: Controlled screw tightening in the most widely used range of 1 - 850 N�m / 0.75 - 630 lbf�ft (guide for screws M3-6.9 to M24-8.8, M30-5.6) Adjustable, releasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the trades Features: Classified as per DIN EN ISO 6789-2:2017 Type II Class A Type II Class A; adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4% (4549-00 +/- 6%) Incl. traceable test certificate For controlled bi-directional tightening 1/4", 3/8", 1/2" mushroom head square socket with ball lock. From 3/4" with square socket and pin retention Sturdy, varnished tubular steel construction, with zinc-plated ratchet head and top-grade plastic parts Ergonomically shaped, convenient black plastic handgrip with calibration aid Dual scale N�m and lbf�ft below a window with a magnifying-glass effect With micrometre scale for main N�m scale for setting interim values Release system triggers a tactile and audible signal Ergonomic system for torque adjustment